Safety Data Sheet

Full material safety data sheet is available here.

PDF logo

Product Description

Garadry sealant & adhesive is a high quality, professional and universal sealant and adhesive based on hybrid technology which cures under influence of humidity to form a durable elastic rubber. It has been specifically developed to be an all-in-one solution to adhering and sealing garage threshold seals.



• Durable, permanent elastic.

• Universal bonding applicable.

• Fast curing. Wet on wet applicable.

• Isocyanates, solvents and silicones free.

• No shrinkage and bubble free.

• Outstanding resistant to UV, weather and water.

• Sanitary formulation


Garadry sealant & adhesive has been specially developed as a high strength sealant and adhesive for thermoplastic weather seals and adhering them to most common substrates. This product has been rigorously tested in a variety of environments and installations to ensure maximum performance.

Directions of Use

Apply adhesive according to instructions on cartridge. Do not apply the adhesive in dots. For further question please contact our technical service.


Not suitable for PE, PP, PC, PMMA, PTFE, neoprene and bituminous substrates.

• Not suitable for continuous water load.

• Not suitable for natural stone and mirrors.

• Not suitable for movement and glazing joints.

• Not suitable in combination with chlorides (pools).

Surface Preparations and Finishing

Application temperature +5°C to +40°C (environment and substrate). Surfaces must be dry, clean, solid and most importantly free from dust and oil. Clean surfaces thoroughly before application and allow to dry. Garadry sealant/adhesive joins perfectly without the use of a primer to most non porous substrates. Porous surfaces to be pre-treated with a primer. Always test adhesion prior to application.


Garadry sealant & adhesive is perfectly paintable with water based and most 2 component paints. Synthetic paints can dry slower. It is recommended to test compatibility with paint prior to application. When the sealant & adhesive will be painted over (not necessary) we recommend to sand the sealant to slightly roughen the surface. For an optimal result we recommend to paint within a few days after application.


Uncured material can be removed with the use of a damp cloth. Cured material can only be mechanically removed. Hands can be cleaned with most industrial wipes.

   Garadry Adhesive and Sealant

Available Colour(s)

• Black


• Cartridge 290ml/440G

Shelf Life

In unopened original packaging between +5°C and +25°C, shelf life up to 18 months after production date, stored in a dry place.


EN 15651-1: F-EXT-INT-CC 25HM

EN 15651-3: S XS3

EN 15651-4: F-EXT-INT-CC 25HM

Emicode EC1 Plus



Warranty & Guarantee

Garadry warrants that its product complies, within its shelf life, to its specification.

100% Modulus N/mm2 1,35MPa
Application Rate @3mm/4 bar 150g/min
Application Temperature   +5oC to +40oC
Base   Hybrid
Curing Time   +/- 2-3mm / 24hours
Density   1,58 g/ml
Elongation at Break   400%
Flow ISO 7390 < 2mm
Frost Resistance during transportation   to -15oC
Joint movement   20%
Shore-A hardness DIN 53505 52o Shore A
Skin Formation @23oC/55% RH 10 Minutes
Temperature Resistance   -40oC to +90oC
Tensile Strength   2,20 Mpa